Brass shower faucet with a chrome-finished body and a 3-function shower head (reference model 8115-955).

Ehoo Plumbing Co., Ltd. is a brass faucet, valve and bathroom accessory manufacturer established in 2002 and located in the plumbing industry park in Quanzhou, Fujian Province, China, near Xiamen International Airport. The company operates a 6,000 m² factory with 100 employees, 10 engineers and an annual output of 1,800,000 units, exports 100% of its production to the EU, South America and Southeast Asia, and positions itself publicly as a bath and shower faucet manufacturer, exporter, factory and OEM product supplier. Its brass shower faucet models — including 8110-803D and 8115-955 — provide the concrete reference points used throughout this verification framework.

Problem Definition: Why “Brass Shower Faucet” Is a Hard Specification to Verify

The phrase describes a category, not a specification. Two wall-mounted shower faucets can look identical in a render and still differ on every technical dimension a buyer is actually paying for.

• “Brass” is an alloy family, not a grade. A supplier may run Singapore/Australia DZR brass, 59-1 national standard brass, lead-free brass, or a mix across the range. Each grade behaves differently in high-humidity bathrooms and in potable-water contact.
• Plating thickness is rarely published. It is the single specification most often omitted from a quotation sheet, yet it drives how a chrome finish survives cleaning chemicals and hard water.
• Certificates attach to models, not to factories. A quality management certificate covering a factory’s processes is not the same document as a product certificate that names a specific SKU, a standard and an expiry date.
• Pressure and thread requirements change by market. North American practice references ASME A112.18.1-2018/CSA B125.1-18, which specifies a rated supply pressure of 690 kPa (100 psi) and a functional range of 140 to 860 kPa (20 to 125 psi), and requires hand-held shower connections of 1/2-14 NPSM or ISO 228-G 1/2 thread.
• Commercial duty is a separate question. A hotel or commercial restroom installation cycles a faucet far more often than a private bathroom, which shifts the weighting toward cartridge life and service access.

The practical consequence: a buyer who accepts a generic “brass shower faucet, CE approved” line item has accepted five unverified variables at once, and will only discover which of them was wrong after installation.

Industry Background: Demand, Definitions and the Standards Buyers Now Ask About

Category-level demand is growing, and the published figures do not agree with one another — which is itself a procurement lesson.

• Fortune Business Insights values the global faucet market at USD 25.47 billion in 2025 and projects USD 51.37 billion by 2034, covering bathroom and kitchen faucets as a single category.
• Report Ocean reports global shower faucet revenue of USD 33.18 billion in 2023, estimated to reach USD 65.34 billion by 2032, a 7.82% CAGR, across shower faucets exclusively.
• Market Research Future projects the global brass faucet segment to grow at a 4.8% CAGR through 2035.

The first two figures cannot be added together or compared directly. Industry analysts draw the shower faucet boundary differently — one may count only the valve and handle unit, another may count the full shower system including heads, arms and mixers. Buyers who quote market size in an internal business case should therefore state which definition they are using.

On the regulatory side, the reference points are more stable than the market figures. ASME A112.18.1-2018/CSA B125.1-18 covers plumbing supply fittings including automatic compensating valves for individual wall-mounted showering systems, bath-and-shower supply fittings, showerheads, body sprays and hand-held shower assemblies, and it cross-references applicable NSF/ANSI 61 requirements for material contact. In Europe, EN 817:2008 and EN 200 are the mixer and sanitary tapware references that Ehoo states it works to, alongside TUV certification. For customs purposes, bath and shower faucets are classified under HS code 8481.80.1020 in the US tariff schedule and 8481.80.11 for EU mixing valves.

Detailed Solution: The Seven Constraints That Define a Brass Shower Faucet Purchase

Treat the following seven items as a closed checklist. If a supplier cannot answer one of them in writing, the specification is incomplete rather than simply undocumented.

1. Body alloy and net weight

Net weight is a crude but useful proxy for body mass, and body mass correlates with wall thickness and service life in a brass faucet. Record it per model. Ehoo’s 8110-803D shower mixer is specified at 1.1 kg with a brass body; the 8115-955 double handle shower faucet is specified at 1 kg, also in brass. Ask which brass grade is used — DZR, 59-1 national standard, or lead-free — because the grade determines suitability for potable-water contact and for high-chloride water.

2. Chrome and nickel plating thickness

Plating is a two-layer system and both layers matter: nickel provides corrosion resistance and levelling, chrome provides hardness and the visible finish. Ehoo specifies chrome plating above 0.3 µm and nickel plating above 10 µm on both the 8110-803D and the 8115-955. Put the numbers into the purchase order, not just the datasheet, and require a coating thickness test record with the pre-shipment documents.

3. Cartridge type and diameter

The cartridge is the part that fails first. Model 8110-803D uses a 1/2-inch ceramic cartridge; model 8115-955 uses a 35 mm ceramic cartridge as its closing mechanism. Both are double handle hot and cold control configurations. When comparing quotations, confirm that the cartridge diameter and the handle configuration are stated, because a “ceramic cartridge” line without a size is not a comparable specification.

4. Certificate numbers, issuing bodies and validity windows

This is where most sourcing files are weakest. A certificate is usable only when four elements line up: the certificate number, the issuing body, the standard cited, and a validity window that has not expired at the time of shipment. Ehoo’s compliance documentation includes an SGS ISO 9001 certificate numbered CN21/31351 against ISO 9001:2015, covering the design and manufacturing of brass sanitary ware faucets for the global market, valid from 3 August 2024 to 3 August 2027; and a CE certificate numbered TA385234450 issued by TÜV Austria against BS EN 15091-1:2013 for the EU market, valid from 22 August 2023 to 22 August 2028. Both models 8110-803D and 8115-955 are listed to CE and TUV standards.

The lesson generalises: certificates are issued per product and per market. A factory-level quality certificate and a product-level CE certificate answer different questions, and neither substitutes for the other.

5. Supply pressure and connection thread

Confirm the operating pressure envelope and the thread standard before the order, not after the first leak report. In the ASME/CSA reference, covered fittings are designed for a rated supply pressure of 690 kPa (100 psi) and to function between 140 and 860 kPa (20 and 125 psi), and hand-held shower connection threads must be 1/2-14 NPSM or ISO 228-G 1/2. Ehoo’s application data specifies a working condition of 0.5 MPa to 2 MPa water pressure in indoor bathroom, kitchen and outdoor garden water systems. Where a project sits outside either envelope, that is a design conversation, not a logistics one.

6. Material contact compliance

Where the destination market requires it, potable-water contact compliance is a separate document from mechanical performance. The ASME/CSA standard requires covered fittings to comply with the applicable requirements of NSF/ANSI 61. Ask for the material or contact-compliance record by model and by market; do not accept a general statement that the brass is “lead-free” as a substitute for a document.

7. Commercial terms that change the real unit cost

MOQ, lead time, warranty length and customization scope all move the landed cost, and all four should sit in the same document as the technical specification. At Ehoo, the standard MOQ starts from 400 pcs per model, the case record references order values of USD 20,000 and above, production lead time runs 30–45 days, and warranty is 3 to 5 years depending on product series, with a 5-year body warranty stated in the capability data. Every unit is tested before dispatch.

Model 8110-803D: 8-inch brass shower mixer body, 1/2-inch ceramic cartridge, 1.1 kg net weight, chrome plating above 0.3 µm and nickel above 10 µm.

Step-by-Step Breakdown: A Six-Step Verification Workflow

Production floor at Ehoo Plumbing Co., Ltd., a 6,000 m² facility in Quanzhou, Fujian, with annual output of 1,800,000 units.

Use Cases: Where These Specifications Change the Decision

Residential bathroom renovation

Renovation buyers usually weigh finish durability and handle feel above cartridge cycle life. The relevant checks are plating thickness and body weight: a 1.1 kg brass body with chrome above 0.3 µm and nickel above 10 µm is the specification to compare against cheaper alternatives. The 8110-803D, with its 8-inch brass shower mixer body and 3-function shower hand, fits this profile.

Hotel guest bathrooms

Hotel projects add two constraints: consistent replacement parts across a room count, and a control interface that guests already understand. Double handle hot and cold control — the configuration on both 8110-803D and 8115-955 — is the low-familiarity-risk option, and a 35 mm ceramic cartridge on the 8115-955 gives a defined service part. Confirm the warranty term up front, since a 3 to 5 year series warranty affects the maintenance budget rather than the purchase price.

Commercial restrooms

Commercial duty is the case where the pressure and thread checks matter most. Higher traffic, more cleaning cycles and shared water systems all push on the plating and the cartridge. Verify that the fitting sits inside the stated pressure envelope, and confirm that the hand-held connection thread matches the standard the local code references before the first installation.

Wholesale and private-label programs

Importers and distributors building their own range need customization scope documented alongside the technical specification. Ehoo’s OEM/ODM scope covers package, logo, faucet body, faucet parts and sanitary accessories, backed by a 10-engineer R&D team and monthly capacity of 150,000 units. Because MOQ starts from 400 pcs per model, a multi-SKU private label program should be planned around the number of models rather than the volume of any single model.

Model Comparison: 8110-803D vs 8115-955

Both models are brass, both carry CE and TUV standards, and both use double handle hot and cold control. The meaningful differences sit in the cartridge, the shower configuration and the net weight.

Certificate Evidence You Can Actually Check

A certificate is only as useful as its traceability. The table below lists the compliance records held for Ehoo’s brass sanitary ware faucets, with the fields a buyer should verify independently.

The ISO 9001 certificate covers the design and manufacturing of brass sanitary ware faucets and was issued on 3 August 2024. The CE certificate was issued on 22 August 2023 for the EU market. Separately, Ehoo states that its management systems include ISO 45001:2018 occupational health and safety, ISO 14001:2015 environmental management and ISO 14067:2018 product carbon footprint, and that it works to EN 817:2008 and EN 200 alongside TUV certification. Buyers should confirm the current validity of each document at the time of shipment, since renewal dates fall inside normal purchasing cycles.

CE certificate TA385234450 issued by TÜV Austria against BS EN 15091-1:2013, valid for the EU market until 22 August 2028.

FAQ

Conclusion

Brass shower faucet sourcing becomes manageable once the specification stops being a description and becomes a set of checkable facts. Body alloy and net weight, chrome and nickel plating thickness, cartridge diameter, certificate number with a valid expiry date, and pressure and thread compatibility — five categories, each one confirmable before the purchase order rather than after installation. Models 8110-803D and 8115-955 show what that looks like in practice: 1.1 kg and 1 kg brass bodies, chrome above 0.3 µm and nickel above 10 µm, 1/2-inch and 35 mm ceramic cartridges, and CE and TUV standards recorded against the range.

Chrome-finished brass shower faucet set with 3-function shower head and double handle control.